How Do Taylor Body Fat Scales Work and the Steps to Set One Up

If you’re looking for a new scale to weigh yourself at home, you might consider one from Taylor Precision Products. The company makes a variety of scales, including models that analyze your body fat percentage.

If you want convenience in a body fat scale, the Taylor models work well enough.

But, “these devices aren’t extremely accurate,” says Nicole Hinckley, RD, LD, registered dietitian and owner of Blissful Nutrition. “Body composition scales provide a rough estimate of a person’s body fat percentage and different substances in the body — and with this information, plus your age, weight, height and sex, it formulates an estimate,” Hinckley says.

The most accurate way to measure body composition is a DEXA scan, which is a bone scan that uses X-ray technology to check strength and density, according to the Mayo Clinic. Of course, that’s not a very accessible option — for a simple at-home option to know your weight, if not your body composition, you can turn to the most accurate scales for body weight.

Understanding how your scale works will give you a better idea of how to operate it.

When you stand on the scale, two electrodes positioned under each foot transmit a harmless, low-level electrical current through your body. The signal passes through lean mass quickly, while fat slows the current down, allowing it to estimate how much of your body is fat and what portion is lean mass.

Taylor body fat scales typically come with batteries. To get started using yours, flip it over and remove the plastic slip sticking out of the compartment (the slip is in place to prevent the batteries from draining while at the warehouse and during shipment). If there isn’t a plastic slip, your model may not have batteries included, which means you’ll have to purchase them separately.

1. Press the power button so it brings up the height screen.
2. Enter your size and then continue to the age, gender and other options. Add each one and following the up arrow until you see a 1, the memory number.
3. Hit set again and the scale should be programmed.

Multiple people can use a single scale. Use the slots — labeled P0, P1 and so on — to enter personal details for each individual. Once you hit set, the information is saved.

Fortunately, the Taylor scale is calibrated for accuracy already, so you don’t need to fiddle with it at home. That said, sometimes shipping causes issues, in which case you’ll need to initialize the scale, per Taylor. Here’s how:

1. Put the scale on a hard surface floor (note: avoid carpeted floors or any uneven surfaces)
2. Put one foot on the scale, pressing down just enough for the display to show either zeroes or dashes.
3. Remove your foot once you see zeroes or dashes on the display, then wait for the scale to turn off.
4. Step up onto the scale for a weight.

You may sometimes find that if you weigh yourself twice, the reading will be slightly different. If the two weights are within two pounds of each other (or within 1 percent for weights over 200 pounds), the scale is working properly. If there’s a bigger discrepancy, it may be that the scale was damaged, either before purchase or during use, or that it’s resting on an uneven surface or carpet, per Taylor.

Follow these steps to calculate your body fat using the scale, according to Taylor:

1. Before you begin, remove your shoes and socks and wipe your feet with a damp cloth.
2. Switch the power on.
3. Press the up or down arrow to navigate to your personal memory number.
4. Once the scale displays “0.0,” place each foot on top of the electrodes, standing as still as possible. After a few seconds, the display will show your weight.
5. Remain on the scale; the upper portion will show “—” while it computes other measurements. After a few seconds, it will display your body fat and water percentage.

Note: The measurements will repeat five times for convenience, giving you time to write them down, if you like.

Hinckley recommends weighing yourself at few times a week so you can note whether some weight is just temporary or not.

“If you see the scale go up momentarily, it’s probably just due to sodium or inflammation,” she says. But if stepping on the scale becomes a negative experience, definitely stop. “If you’re discouraged when you’re on the scale, check to see how your clothes are fitting or consider taking your measurements,” she says.

And it’s a good idea to learn the best time to weigh yourself, too. Per the Taylor user manual, the most consistent way to read the scale is at the same time of day and under the same conditions, say, in the morning, naked. The scale also works as a regular scale that measures only weight. For this, just turn the scale on and stand on it, waiting a few seconds for your weight to appear.

If things go wrong with your scale, it may leave you wondering why your Taylor scale isn’t working. Fortunately, as with many electric scales, Taylor scales have error messages to offer feedback — Error 1, for instance, indicates that the scale isn’t stable, and you should check that the surface is even and not a rug or carpet.

Other errors will pop up if your feet aren’t damp enough for the body fat reading, your feet aren’t big enough to reach the sensors or the body fat or water percentage numbers are out of range for the scale.

If you receive an error message — or the scale behaves oddly — a good first step is to reset the scale, which you can do by following these steps, per Taylor:

1. Remove the battery.
2. Place the scale on a hard and flat surface (no rugs or carpets).
3. Stand still on it for 5 seconds and then step off.
4. Put the battery back in.
5. While being sure to be on a smooth floor, place just one foot on it so it displays zeroes or dashes.
6. Remove your foot.
7. Wait for the scale to turn off and then mount it again. If the reset worked, you should see your weight right away, but if this isn’t the case, a call to customer service may be next or you can reset it a second time.

They can be.

“If you’re going to get on a scale it can be helpful to see if your body composition is changing,” Hinckley says. It can be discouraging to see the number go up or plateau, even if you’re losing body fat and gaining muscle, she adds. With a body fat scale, these body composition changes are more apparent.

But keep in mind that body composition scales are only providing a rough — not precise — estimate of your body fat, as Hinckley mentioned. In general, these scales may be more likely to overestimate body fat percentage, according to the Cleveland Clinic.